DD132MKII can converted almost all usually dc batteries into qualified power supply
It is used to protect certain equipment that is harsh on working voltage from being burnt by excessive voltage: for example, ZOOM F8,F4, Fostex  recorder, working voltage is up to 15V
Now the most common source of power is 14.8v lithium power supply, but the maximum voltage of 14.8v nominal lithium batter  full charge is 16.8v, in the case of full power needs to work for a period of time before it will fall to the operating voltage range of these devices, Recently, many devices appear to burn, outage, white and black screen. The DD132MKII can protects these expensive equipment.

specifications：
INPUT： DC： 5-32V（MAX35V） 
OUTPUT：13.8 2A(MAX 3A)
Dimensions：60*25*25(no include cable ）
Wt：140g/4.9oz

Compared with the first stable pressure line, the following differences are observed:
The first generation voltage regulator guarantees that the output voltage is not more than 12 V, but when the battery voltage is less than 12 V, it will decrease with the voltage drop, the MKII will keep the output of 13.8 V, the external power supply as long as there is output, DD132MKII always stays at 13.8V
2. Improve conversion efficiency:
The new generation improves not only on efficiently, battery capacity, we also reduced heat produced during the course.
3. Expand adaptability:
MKII the best part about this new generation is its adaptability, it can connect with almost any batteries. Allowing you to put any batteries you have in hand in use.